Air compressor suitable for above air plasma cutting system
Air Compressor (for Air Plasma Cutting)
Overview
This Air Compressor has been specified and packaged to supply clean, dry, oil-free compressed air for Air Plasma Cutting Equipment (40A–60A class). It delivers stable pressure and sufficient flow to ensure consistent arc stability, minimal dross, and reliable torch performance — essential for both manual and CNC plasma cutting applications.
The recommended configuration combines an oil-free compressor element (or oil-less pump), an appropriately sized receiver tank, refrigerated dryer / coalescing filtration, pre-regulator with air dryer, and downstream pressure regulator with gauge and moisture trap for best results.
Product Range
★ Portable oil-free piston compressor with 100–200 L tank
★ Belt-driven oil-free compressor (1.5 – 3.0 HP) with receiver
★ Screw-type oil-free rotary compressor for continuous CNC use
★ Packaged compressor set with refrigerated dryer & filters
★ Mobile compressor trolley with integrated air treatment
★ Belt-driven oil-free compressor (1.5 – 3.0 HP) with receiver
★ Screw-type oil-free rotary compressor for continuous CNC use
★ Packaged compressor set with refrigerated dryer & filters
★ Mobile compressor trolley with integrated air treatment
Key Features
★ Oil-free / oil-less air delivery suitable for plasma torches
★ Stable delivery pressure at 4.5 – 6.0 kg/cm² (≈4.4–5.9 bar)
★ Adequate free air delivery (FAD) for 40–60A plasma: 150–300 L/min
★ Receiver tank to dampen pulsations and provide reserve capacity
★ In-line refrigerated dryer and coalescing filters to remove moisture & oil
★ Pressure regulator with gauge and auto-drain condensate system
★ Low noise, vibration-isolated base and service-friendly layout
★ Optional air booster / secondary regulator for CNC mechanization
★ Stable delivery pressure at 4.5 – 6.0 kg/cm² (≈4.4–5.9 bar)
★ Adequate free air delivery (FAD) for 40–60A plasma: 150–300 L/min
★ Receiver tank to dampen pulsations and provide reserve capacity
★ In-line refrigerated dryer and coalescing filters to remove moisture & oil
★ Pressure regulator with gauge and auto-drain condensate system
★ Low noise, vibration-isolated base and service-friendly layout
★ Optional air booster / secondary regulator for CNC mechanization
Applications
★ Supply air for manual and CNC air plasma cutting systems (40A–60A)
★ General workshop compressed air for pneumatic tools and blow-off
★ Laboratory and prototyping workshops where oil-free air is required
★ Supporting cutting, gouging, and pilot arc operations in fabrication shops
★ General workshop compressed air for pneumatic tools and blow-off
★ Laboratory and prototyping workshops where oil-free air is required
★ Supporting cutting, gouging, and pilot arc operations in fabrication shops
Learning Outcomes
★ Understand compressed air requirements for plasma cutting technology
★ Learn how to size compressor, receiver, and air treatment for torch stability
★ Study effects of pressure, flow, moisture and oil contamination on cut quality
★ Gain practical skills in installing filters, regulators and condensate drains
★ Configure a reliable air supply for manual and CNC plasma cutting environments
★ Learn how to size compressor, receiver, and air treatment for torch stability
★ Study effects of pressure, flow, moisture and oil contamination on cut quality
★ Gain practical skills in installing filters, regulators and condensate drains
★ Configure a reliable air supply for manual and CNC plasma cutting environments
© 2025 Sai Sree . All Rights Reserved.